Compression Head To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts. ASTM Compress Head Standard：ASTM F 963 8.10.1 EN Compression Head Standard EN71-1998 8.8 dimension ：28×28×19mm Diameter 30 mm round rod

Pacifier Test Fixture To determine whether the pacifiers for infants present choking or suffocating hazards. A pacifier is placed centrally in the opening of test fixture. The nipple is subjected to a tensile force of 2 lbs and held for 10 seconds. If the shield is pulled through the fixture, the pacifier has failed. Standard: 16 CFR 1510; ASTM F 963 4.21; EN71

Rattle Test Fixture To determine whether rattles for infants of up to 18 months old present choking or suffocating hazards. The rattle is placed in the opening of test fixture. If any part of the rattle can pass through the opening without being pushed or pulled, the rattle has failed. For other rattles incorporating nearly spherical, hemispherical or circular flared ends, a Supplemental Rattle Test Fixture is available. Standard: 16 CFR 1510; ASTM F 963 4.21; EN71-1998 8.17; GB6675-2003 A.5.3

Accessibility Probes To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe B for 37-96 months Standard: 16 CFR 1500.48; 16 CFR 1500.49; EN-71; GB 6675-2003

Impact Tester SL-S11 To simulate the mechanical damage through an impact action likely to be performed by a child. Assessment of sharp edges, sharp points and small parts may be carried out after impact. Standards: EN 71-1998 8.7 specifications： 1.dimension ：300(l)x300(w)x16(h)mm 2.adjust height：0-200mm 3.impact hammer diameter：80.00mm 4.impact hammer weight ：1Kg 5. with metric / imperial unit height dictate rule