ASTM Impact Flooring Medium A standardised surface onto which a toy can be dropped from a certain height to simulate possible damage which may occur by falling from a crib, table or counter top or other impact situations. After testing, the toy is examined for possible hazards such as sharp edges, sharp points and small parts. Standard: ASTM F963 Specification：1/8″×12″×12″ 9 a Standards ：ASTM F963 8.7.1

Push Pull Gauge To determine whether the components of toys can be removed by tensile force. A Force gauge is used in conjunction with a clamp to record the force applied. Any projection, part or assembly of a toy that a child can grasp with at least the thumb & forefinger or the teeth shall be subject to the tension test. Related standards ASTM F963 CFR 16 CFR CPSC USA EN71

Bite Test Clamp Simulates a child biting the accessible area of toys. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period. The toy is then tested to ascertain whether or not any hazards result from the bite test such as sharp points/ sharp edges / small parts. Standard: ASTM F963, 16CFR 1500.52C

EN 71 Impact Flooring Medium A standardised surface onto which a toy can be dropped from a certain height to simulate possible damage which may occur by falling from a crib, table or counter top or other impact situations. After testing, the toy is examined for possible hazards such as sharp edges, sharp points and small parts. Specification：2mm Rubber+4mm SST Sheet 600mm×600mm Standard EN 71

Flexure Test Fixture To determine whether metallic wires or materials used for stiffening or retention of form in toys can be easily bent or broken. Potential hazards of sharp points & sharp edges. Standards: 16 CFR 1500.48 16 CFR 1500.49 EN-71