Chair Pull Back Impact Tester Purpose: To check if each part is the same, loose and weld color fastness Instruction; Fixed Chair casters, the back of Chair to a certain strength, speed, direction, trips and backs a set amount of repeated actions, and then the review of each part are the same, loose and weld color fastness Specification 1. Load: 0~200kg adjustable 2.Route:0~300mm adjustable 3.Test speed;10~30 times(can be set) 4.Test times: 0~999999 times(can be set) 5. Controller: PLC touch screen control 6. Printing devices: the Chinese micro-print test report 7 Dimension: 2200×900×2100mm 8 Power Supply: AC220V 50HZ

Caster of Chair Durability Tester Purpose: For the assessment of office chair in the rotation ability for load conditions Instruction: The machine used in the crust has a rotation of the Office Chair, used to assess the situation that Office Chair in the load under rotation, seat surface of office chair place weight-bearing, powered by a pneumatic cylinder, Office chairs for travel to action, to assess the wear life of casters, tour. rate and frequency can be set, test Caster's durability ability Specification One station Controller: PLC touch screen control Printing devices: the Chinese micro-print test report Weight:1 Rail: 1 group Reciprocating speed: 5-15CPM or specify Cylinder: diameter 63 x tour 990mm Cylinder output height:30~48cm Dimension: 84x270x80cm Power supply: single phase AC220V 0.5A

SDC Cotton Lawn Rubbing Fabric SL-C01 For use in testing the wet and dry rubbing fastness of textiles ISO 105 X12, M&S C8 and Shower resistance tests. Specification: 1 Piece 5cm x 5cm, 500 Piece Pack

SDC Humidity Control Fabric Humidity Control Fabric to meet ISO/BS standards, 1 piece 250mm (10”) X 150mm (6”),This is an azoic dyed cotton fabric with specified fading properties, which varies with the amount of relative humidity. It is used as a calibration tool for light fastness testing. When the humidity of the light fastness testing machine is correctly set it will fade at an identical rate to the light fastness standard Number 5.

Hot Air Oven Specification Inside Body : Stainless Steel (SS 304) Out Side Body : MS Powder coated with stove enamel paint. (Fully SS Models also available) No. of Selves : 2 Adjustable Perforated Selves. Body Structure : Double Walled structure filled with glass wool insulation No. of Heaters : 2 x 1000 Watts Heater's Quality : High Quality Chrome Heater insulated with ceramic beads Air Circulation: By Air Circulating Fan to ensure even temperature distribution. Ventilation : Ventilation port with adjustable Opening Temp. Control : By Digital Temperature indicator and Controller Temp. Display : Digital Temperature display Range of Temp : Ambient to 250oC Accuracy : 0.1oC Least Count : 1oC Power : 220 Volt AC 50 Hz. Single Phase Related Standards ASTM D 5427 - 98