Desk Integrate Tester Purpose: Adjustable desk strength, containing Center load, load and stability testing Instruction: This machine is three-in-one integrated testing machines, strength of adjustable desk, contains a center load, load and tester Specification 1 Tong heads: Center next to the loading point-end load-side load stability test 2.Test block size: 300-300mm 200-200mm 200-200mm 100-100mm 3.Load: 200kgs 75kgs 45kgs 45kgs 4.Test Time:24 hours 30 minutes 5 seconds,3min 5. Controller: PLC touch screen control 6. Printing devices: the Chinese micro-print test report 7.Materials:Can be set per office Tong heads 8.Weight: Can be set per office Tong heads

Chair Pull Back Impact Tester Purpose: To check if each part is the same, loose and weld color fastness Instruction; Fixed Chair casters, the back of Chair to a certain strength, speed, direction, trips and backs a set amount of repeated actions, and then the review of each part are the same, loose and weld color fastness Specification 1. Load: 0~200kg adjustable 2.Route:0~300mm adjustable 3.Test speed;10~30 times(can be set) 4.Test times: 0~999999 times(can be set) 5. Controller: PLC touch screen control 6. Printing devices: the Chinese micro-print test report 7 Dimension: 2200×900×2100mm 8 Power Supply: AC220V 50HZ

Slip Type Life Tester SL-T10 Detailed parameter: It is used for testing fatigue life of the slip type parts, such like caster, slip door, drawer. Testing terms: caster durability test, drawer slider testing, slip door durability testing. Caster loading: 102kg

Caster of Chair Durability Tester Purpose: For the assessment of office chair in the rotation ability for load conditions Instruction: The machine used in the crust has a rotation of the Office Chair, used to assess the situation that Office Chair in the load under rotation, seat surface of office chair place weight-bearing, powered by a pneumatic cylinder, Office chairs for travel to action, to assess the wear life of casters, tour. rate and frequency can be set, test Caster's durability ability Specification One station Controller: PLC touch screen control Printing devices: the Chinese micro-print test report Weight:1 Rail: 1 group Reciprocating speed: 5-15CPM or specify Cylinder: diameter 63 x tour 990mm Cylinder output height:30~48cm Dimension: 84x270x80cm Power supply: single phase AC220V 0.5A

Torque Gauge To determine whether components of toys can be removed by a certain torque force. A torque-measuring device is used in conjunction with a torque clamp to record the applied force. Any projection, part or assembly of a toy that a child can grasp with at least the thumb & forefinger or the teeth shall be subject to the torque test. Related standards ASTM F963 CFR 16 CFR CPSC USA EN71