This testing is suitable for testing the safety capability of Mouth Toys. Satisfied conditions：create 295 ± 10cm3 gas volume within 5s at least，And can be alternately blowing and suction toys 10 times. Equipped with imported high-precision pressure gauge. Gas flow can control by the valve. Mouth Actuated Tester Testing Safety requirements： 1. Mouth toys and toy in which to remove the mouthpiece and cannot be a Widget 2. The un-removed mouthpiece in the mouth moving toys, run soaking test, the torque test and tensile test shall not create small parts 3.The mouth toys if they contain loose parts, when running the durability test shall not create small parts ( alternately blow and suction toys using 295 ± 10cm3 gas volume within 5 seconds and repeat 10 times) 4. Removable or cannot remove the mouthpiece of the balloons must comply with the requirements of 1 and 2 Standards EN 71、GB/T 6675、ASTM F963 Technical Parameters Item Specifications Gas Pressure 0-10kgf/cm2adjustable Display mode LCD display Blow-suction flow 295±10cm3/s adjustable Counter 9，999 times, can be specified Gas Pressure 0~10kg/cm2 adjustable Power supply 1∮，AC 220V，100W Dimension (650*400*260)mm

Toy Lid Durability tester applies to test the durability of toys lid switch can be repeated. The instrument with a rotating pendulum driven toys lid movements, simulated toy lid after a certain number of repeated opening and closing movements, the toy lid hinged part of the feature is intact. The instrument complies with ASTM F963 and GB 6675-2003 National Safety Technical Code for Toys Manufacturing Test times: 0-999, 999 times can be set Test precision: 0-10 time/min Display mode: Displayed by big digital liquid crystal screen Control mode: Controlled by Micro-computer automatically Action mode: Electromotion or Automatism Test pieces: Stop automatically Standards: 16 CFR 1500, ASTM F963 4.8, EN-71, ISO 8124

Salt Spray Tester/ Salt Fog Tester Corrosion Test Equipments/ Salt Fog Test Equipments The Salt Spray Chamber are specialized to test the performance of the products for its surface of various materials after treatment of corrosive protection by means of painting, coating, galvanizing, anodizing and of lubricant. Material: 1) Laboratory using PVC sheet, thickness 5 mm, the temperature reaches 80 degree Celsius; 2) Laboratory closure with high impact acrylic sheet, 6 mm thick; 3) Supplementary bottles of reagents attached to the water level perspective with hidden windows, clean easy, not easy to break; 4) Saturated air barrel using SUS #304 stainless steel barrel high pressure barrel insulation is best; 5) Laboratory basketball adopt flat indexing frame, adjustable angle, surrounded by mist side down exactly the same place the large number of test pieces Salt spray test NSS,ACSS laboratory 35℃±1℃ Saturated air drums 47℃±1℃ Corrosion test NSS.ACSS laboratory 50℃±1℃ Saturated air drums 63℃±1℃ Comply to international standards: CNS3627, 3885, 4159, 7669, 8886, JIS Do201, H8502, H8610, K5400, Z2371, ISO3768, 3769, 3770, 9227, ASTM B117, B268 Capacity: 110, 270, 480, 640L

Salt Spray Tester/ Salt Fog Tester Corrosion Test Equipments/ Salt Fog Test Equipments The Salt Spray Chamber are specialized to test the performance of the products for its surface of various materials after treatment of corrosive protection by means of painting, coating, galvanizing, anodizing and of lubricant. Material: 1) Laboratory using PVC sheet, thickness 5 mm, the temperature reaches 80 degree Celsius; 2) Laboratory closure with high impact acrylic sheet, 6 mm thick; 3) Supplementary bottles of reagents attached to the water level perspective with hidden windows, clean easy, not easy to break; 4) Saturated air barrel using SUS #304 stainless steel barrel high pressure barrel insulation is best; 5) Laboratory basketball adopt flat indexing frame, adjustable angle, surrounded by mist side down exactly the same place the large number of test pieces Salt spray test NSS,ACSS laboratory 35℃±1℃ Saturated air drums 47℃±1℃ Corrosion test NSS.ACSS laboratory 50℃±1℃ Saturated air drums 63℃±1℃ Comply to international standards: CNS3627, 3885, 4159, 7669, 8886, JIS Do201, H8502, H8610, K5400, Z2371, ISO3768, 3769, 3770, 9227, ASTM B117, B268 Capacity: 110, 270, 480, 640L

Sharp Point Tester To determine whether accessible sharp points on toys are likely to cause injury. If the accessible sharp point penetrates a specified depth into the small rectangular opening of the tester, the LED is illuminated to indicate that the point is unacceptably sharp. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing. Related Standards ASTM F963 EN71