View Storefront
Welcome Fancel Xiao
Your Company Profile
| Company Name | Skyline Instruments Co.,LTD |
| Company Profile | Skyline Instrument (HK) Co.,Ltd is a manufacturer of laboratory and sample dyeing testing equipment as well as quality control testing instruments. We have provided value added support services like lab layout, calibration testing procedures / standards, recording techniques and operations of equipment, etc. With a network of representatives providing sales and technical support world-wideSkyline Instruments has achieved good repute in the fields of textile testing equipments, toy testing equipments, furniture testing and other measurement test equipments.Skyline has been the worlds No 1 testing equipment supplier. As a global leader in testing equipments skyline’s mission is “ To provide innovative, clean and effective testing solutions for better tomorrow”. |
| Company Logo | ./uploads/5363companylogo.jpg |
Welcome Fancel Xiao
View Your Product
| (1) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Aging Machine |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Aging Machine To evaluate the surface visual changed after the test Temperature Range: Ambient +10°C to +300°C Temp. Accuracy: ±0.5°C Temp. Regularity: ±2°C at 200°C, ±3°C at 300°C Indication Resolution: 0.1°C Heating-up time: Approx. 40mins External Material: Stainless steel plate+poweder coated Internal Material: SUS#304 stainless steel plate Insulation: Fiberglass wool |
| (2) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Akron Abrasion Tester SL-L07 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Akron Abrasion Tester To measure abrasion resistance of out-sole material This tester is designed to use together with a special balance for testing the abrasive consumption for the rubber products such as sole. Tire, belt of tank…etc. Produce Spec:BS-903,GB/T-1689 Specimen：63.5mm,X12.7mm X12.7mm L 220mm, hardness 60-70 Grinding Wheel：D150mm,W25mm, Specimen Rotating Speed：BS 250±5r/min, GB76±2r/min Load ：21b, 61b Balance Weight ：2.5kg Counter：LCD，0~999，999(6digital) Dimension(W*D*H)：58*52*46cm Weight：60 Power：1∮,AC 220V,3A |
| (3) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | NBS Rubber Abrasion Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | NBS Rubber Abrasion Tester The specimen under the specified load is abraded by the grinding paper stuck onto a rotating drum to check its abrasion consumption. Specifications: Load: 22N, 3sets Grinding Cloth: 40#grit Counter: LCD, 0~99,999,999 Dimension (W*D*H): 72×49×50 cm Weight: 104KG Power: 1∮, AC220V, 3 A |
| (4) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Electronic Bursting Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Electronic Bursting Tester This instrument is an international general (Mullen)-type apparatus, widely applied to packaging materials, mainly for the determination of Single and multi-layer cardboard and corrugated cardboard can also be used for silk, cotton and other non-paper materials, the bursting strength test. To put material only then automatically detect, automatic testing, automatic hydraulic recoil and automatic calculations, store test data, print instrument with digital display and can automatically print test results and data processing. Standards: JIS-L1004, L1018, L1031, K6328, P8131, P8112 and ASTM-D2210, TAPPI T403, ISO2759-2001, GB/T1539 The main technical parameters: Induction: Pressure Converter Instruction mode: LCD display Mode of operation: automatic (by pressing the test button and no clear peak) Power unit: kpa, psi (Lbs / in ^ 2), kgf / cm ^ 2, with unit switching function Capacity choice: high-pressure 0 ~ 100kgf/cm ^ 2 (0.1kgf/cm ^ 2) Clamping ring material: stainless steel SUS # 304 Clamping ring diameter: upper and lower clamping ring diameter φ31.5 ± 0.05mm Hydraulic oil: 85% glycerol, 15% distilled water Pressing speed: high-pressure 170 ± 10ml/min Horse Power: 1/4HP motor vibration Dimensions: (L × W × H) 430 × 530 × 520mm Weight: 64kg Power source: 1 ∮, AC220V Standard configuration: a rubber membrane, a wrench, calibration film 10, a bottle of glycerin. |
| (5) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Ross Flexing Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Ross Flexing Tester To measure cracking resistance of sole material crack when it was bended Standards: ASTM-D1052 SATRA TM60 ISO-4643 To measure cracking resistance of sole material crack when it was bended Specially test the flex-endurance of rubber, sole, PU…etc. The constant expansion by this machine, bending, examines the minus failure, damaged and cracked degree. Fixture six groups (sets), an augmentation, can test 12 slices counter LCD, 0 ~ 99999999 dimension 78 x 48 × 44 cm weight 56 kg power supply for 1, AC220V, 3 A |
| (6) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Shoes Flexing Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Shoes Flexing Tester To determine shoe flexibility and cracking resistance because of flexing movement in specific degree/speed It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency. Specimen 2paris（4pieces）UK size for children’s shoe 4~13;for adult`s:1~12 Flexing Angle 10°,15°,20°,25°,30°,45°,50°,60°,90°（Adjustable） Counter LCD,0~99,999,999 Dimension（W×D×H） 95×56×63 cm Weight 267kg Power 1∮,AC220V,3A |
| (7) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Formaldehyde Test Chamber SL-T22 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Formaldehyde Test Chamber SL-T22 Formaldehyde is widely used in industry to manufacture building materials and numerous household products. It is also a by-product of combustion and certain other natural processes. At room temperature, formaldehyde is a colorless, flammable gas that has a distinct, pungent smell. It is also known as methanal, methylene oxide, oxymethyline, methylaldehyde, and oxomethane. Sources of formaldehyde in the home include building materials, smoking, household products, and the use of un-vented, fuel-burning appliances such as gas stoves. There are a number of dangers associated with exposure to Formaldehyde, which is classed with chemicals such as Arsenic and Cyanide Conforms to the standards E-1333-96 ASTM D6007-02 ENV717-1 Specifications Capacity of test chamber 1 cubic meters Temperature Range: 20 to 30 Celsius degree Adjustable precision: ±0.5 Celsius degree Test precision: ±0.1 Celsius degree Humidity range 40-70% R.H Adjustable precision: ±0.5% R.H Measurement precision:±.1% R.H Dimension of test chamber: 800x800x1578mm Dimension of external: 1400x2000x2100mm |
| (8) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Small Ball Test Fixture SL-S26 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Small Ball Test Fixture Small ball test fixture is use to examine a toy up of whether small ball accessories may result in the child swallow, stop breath way and esophagus to cause choking danger or not Standards: EN -71 ASTM |
| (9) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Gauss Meter SL-S27 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Gauss Meter Easy to use, simple operation, is KANETEC through the production of magnetic products accumulated in the course of experience and success developed a manual test electronic display type Gauss Meter.In addition to the original features, the new models to increase the output of the RS232 interface, can also buy cable will determine the data transfer to a personal computer. indicate range 0-1500MT Model TM-701 (with RS232 output port) DC, AC magnetic beam density Unit MT / G-cut alternative; 1T = 10000G Measurement mode decomposition can indicate the accuracy of determination of the scope DCX1 0-200mT 0.1mT ±5% 200.1-1500mT 1mT ±5% DCX10 0-150mT 0.01mT ±5% ACX10 0-200mT 0.1mT ±5% 0-75mT 0.01mT ±5% Five digits LCD display Forms check the numbers Polarity level Function of zero-level Max Auto Power Off Temperature 0 - +40 ℃ Power 1.5Vx4 Volume size 140 × 64 × 30mm Standard Accessories probe, batteries, soft leather bag |
| (10) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Mouth Acted Toys Tester SL-S28 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | This testing is suitable for testing the safety capability of Mouth Toys. Satisfied conditions：create 295 ± 10cm3 gas volume within 5s at least，And can be alternately blowing and suction toys 10 times. Equipped with imported high-precision pressure gauge. Gas flow can control by the valve. Mouth Actuated Tester Testing Safety requirements： 1. Mouth toys and toy in which to remove the mouthpiece and cannot be a Widget 2. The un-removed mouthpiece in the mouth moving toys, run soaking test, the torque test and tensile test shall not create small parts 3.The mouth toys if they contain loose parts, when running the durability test shall not create small parts ( alternately blow and suction toys using 295 ± 10cm3 gas volume within 5 seconds and repeat 10 times) 4. Removable or cannot remove the mouthpiece of the balloons must comply with the requirements of 1 and 2 Standards EN 71、GB/T 6675、ASTM F963 Technical Parameters Item Specifications Gas Pressure 0-10kgf/cm2adjustable Display mode LCD display Blow-suction flow 295±10cm3/s adjustable Counter 9，999 times, can be specified Gas Pressure 0~10kg/cm2 adjustable Power supply 1∮，AC 220V，100W Dimension (650*400*260)mm |
| (11) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Toy Lid Durability Tester SL-S21 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Toy Lid Durability tester applies to test the durability of toys lid switch can be repeated. The instrument with a rotating pendulum driven toys lid movements, simulated toy lid after a certain number of repeated opening and closing movements, the toy lid hinged part of the feature is intact. The instrument complies with ASTM F963 and GB 6675-2003 National Safety Technical Code for Toys Manufacturing Test times: 0-999, 999 times can be set Test precision: 0-10 time/min Display mode: Displayed by big digital liquid crystal screen Control mode: Controlled by Micro-computer automatically Action mode: Electromotion or Automatism Test pieces: Stop automatically Standards: 16 CFR 1500, ASTM F963 4.8, EN-71, ISO 8124 |
| (12) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | 1 m³ Test Chamble For Formaldehyde Release SL-E04 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | 1 m³ Test Chamble For Formaldehyde Release Specifications Inner capacity 1000L± 2% Temperature range 20~40℃；± 0.5'C, Temperature uniformity 士1'C Humidity range 30%～60%RH；± 3.0%RH Air exchange rate 1 士0.05h-1 Air velocity 0.1-0.5m／s Formaldehyde in cabin ≤0.006mg/m³ Power supply 220V, 16A Noise under 70dB Standard Referenced 1. GBl8580-2001 "indoor decoration materials, man-made board and products of man-made board formaldehyde release limit " 2. ASTM D6007-2 "Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber " 3. EN 717-1 Wood-based panels - Determination of formaldehyde release |
| (13) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | ASKER Hard meter F type |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | ASKER Hard meter F type Standard: JIS K 7312 Measure range: 0degree～100 degree Minimum scale 1 degree (precision is obtai degree) Creasing shape (mm) height 2.54: diameter of 5.8 + /-0.2 hemispheres Spring load mN（g） 0 degree 539（55±8） 100 degree 8379（855±8） Pressure area of about 5.2 mm (diameter) Pressure surface (mm) 44 × 18 (rectangular) dimension 57×30×76 weight（g）200 |
| (14) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Automotive Wires Flammability Tester SL-S28 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Automotive Wires Flammability Tester Conforms to standards：QC/T703-2005，SAE-J 1128-2005 Application: Rated voltage 50 V MMS or below ground vehicles with low voltage electrical system of primary cable flame retardant test, automotive wires. This instrument is made of control panel, flammability chamber, Bunsen burner, Electromagnetic valve, High pressure ignition, Gas pipe, Pressure regulating valves,timer, Governing valve control wire Main parameters： 1）dimension 500x650x400 mm 2）Burning gas using high purity propane gas or liquefied petroleum gas 3）Tested wires length：600mm(24 in), Sample clamping Angle：45 degree。 4）The bunsen burner has 13mm inlet hole and 10mm (3/8 in) nominal diameter, spray fire pipe outer flame diameter is 100mm (4in), inner flame is 50 mm(1/2in),temperature of inner flame as least 900 degree celsius. 5）The Bunsen burner flame should be put in the bottom of the samples and perpendicular to the axis of the sample. The tip of the inner flame role should be in the midpoint of the sample 6）Automatic ignition: flame burn the sample continue 15 seconds and be off automatically. 7）After burning 15 seconds, will time the continued burning, complete the continued burning time until the continued burning crush out and put off the stop button. 8) Burning gas is not supplied with the tester; it should be supplied by customer. |
| (15) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | UV-VIS Spectrophotometer SL-D04 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | UV-VIS Spectrophotometer SL-D04 Optical system The proportion of dual-beam Photometry transmittance absorbance the energy reflectance Wavelength range 190 nm～1100 nm Spectral bandwidth 2nm Stray light ≤ 0.05% T (220nm NaI solution) Wavelength accuracy ± 0.5nm Wavelength Repeatability 0.1 nm Luminosity range －3 A～3 A Photometric accuracy ± 0.3% T (0 ~ 100% T), ± 0.002Abs (0-0.5Abs), ± 0.004Abs (0.5-1Abs) Photometric repeatability 0.001Abs (0-0.5Abs), 0.002Abs (0.5-1Abs) Stability 0.001Abs / h Noise <± 0.001Abs Baseline flatness ± 0.002Abs |
| (16) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Button Snap Tester/ Button Pull Tester SL-F14 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Button Snap Tester/ Button Pull Tester Button Snap Pull Tester’ is a user friendly equipment to test ‘SNAP STRENGTH’ of buttons/rivets/joints to ensure that it meets design tolerance and safety levels, particularly in baby clothing. The equipment comprises of- a) IMADA Push-Pull force gauge of 20 Kgf. b) Vertical stand to hold the gauge with arrangement to change the position of gauge. c) Base which houses the frame to grip the attachment. d) ‘Button Pull Fixture’- Connected with force gauge. Suitable to grip buttons from 5mm to 25mm. The needle in the gauge stops at the breaking load. |
| (17) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Desk Integrated Tester SL-T21 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Desk Integrate Tester Purpose: Adjustable desk strength, containing Center load, load and stability testing Instruction: This machine is three-in-one integrated testing machines, strength of adjustable desk, contains a center load, load and tester Specification 1 Tong heads: Center next to the loading point-end load-side load stability test 2.Test block size: 300-300mm 200-200mm 200-200mm 100-100mm 3.Load: 200kgs 75kgs 45kgs 45kgs 4.Test Time:24 hours 30 minutes 5 seconds,3min 5. Controller: PLC touch screen control 6. Printing devices: the Chinese micro-print test report 7.Materials:Can be set per office Tong heads 8.Weight: Can be set per office Tong heads |
| (18) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Chair Pull Back Impact Tester SL-T20 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Chair Pull Back Impact Tester Purpose: To check if each part is the same, loose and weld color fastness Instruction; Fixed Chair casters, the back of Chair to a certain strength, speed, direction, trips and backs a set amount of repeated actions, and then the review of each part are the same, loose and weld color fastness Specification 1. Load: 0~200kg adjustable 2.Route:0~300mm adjustable 3.Test speed;10~30 times(can be set) 4.Test times: 0~999999 times(can be set) 5. Controller: PLC touch screen control 6. Printing devices: the Chinese micro-print test report 7 Dimension: 2200×900×2100mm 8 Power Supply: AC220V 50HZ |
| (19) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Caster of Chair Durability Tester SL-T19 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Caster of Chair Durability Tester Purpose: For the assessment of office chair in the rotation ability for load conditions Instruction: The machine used in the crust has a rotation of the Office Chair, used to assess the situation that Office Chair in the load under rotation, seat surface of office chair place weight-bearing, powered by a pneumatic cylinder, Office chairs for travel to action, to assess the wear life of casters, tour. rate and frequency can be set, test Caster's durability ability Specification One station Controller: PLC touch screen control Printing devices: the Chinese micro-print test report Weight:1 Rail: 1 group Reciprocating speed: 5-15CPM or specify Cylinder: diameter 63 x tour 990mm Cylinder output height:30~48cm Dimension: 84x270x80cm Power supply: single phase AC220V 0.5A |
| (20) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | AATCC Washing machine (Whirlpool) SL-F31 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | AATCC Washing machine (Whirlpool) It is a shrinkage tester appointed by American AATCC This machine through either the family type washed many times to the textile afterwards measures the textile the shrinkage or the elongation ratio, after also might carry on each kind to wash the outward appearance evaluation. Meet to AATCC standard testing method (88B+C, 124, 130, 135, 142, 143, 150, 172 and 179). Parameters: dimension 1095× 685× 675mm washing capacity 18 pound/8.2kg washing process 9 water temperature 5 sect water level 3 sect washing method rolling plus stirring place of original USA power 220V/50Hz |
| (21) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | AATCC Standard Dryer (whirlpool) SL-F32 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | AATCC Standard Dryer (whirlpool) It is a shrinkage tester appointed by American AATCC Meets to AATCC standard testing method (88B+C, 124, 130, 135, 142, 143, 150, 172 and 179) Drying methods: drying time for pre-school / incomplete dry clothes Air-dry; strong drying / incomplete dry clothes; automatic rotation 30-90 minute, cold crease. Techniques: dimension 1092× 740× 710mm(L× W× H) drying capacity 18 pound/8.2kg drying process 3 temperature option 2 model no. 3 XLER5437 place of original USA power 220V/50Hz/30AN |
| (22) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Ozone Test Chamber |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Ozone Test chamber is used for testing rubber and polymer. Put the sample in certain density ozone environment, after having certain discoloration or the scheduled time and compare with the standard card. Applications of Ozone Test Chamber • Accelerated Aging Studies • Product Quality Control • Research & Development • Quality Assurance Standards OZ air series "ozone test chambers" are manufactured with flexibility for testing with following standards • ASTM D 518 IS-3400 (Part-20) • ASTM D 1149 ISO 1431-1 : 1989 • ASTM D 1171 • ASTM D 3395 • ASTM D 4575 • BIS, ISO, DIN, MIL Stainless chamber walls are sealed with high-grade fiber gasket to assure leak proof operation Ozone concentration 50～1000pphm Test chamber temperature RT～+60℃ surface temperature fluctuations degrees + /-0.5 ℃ Load 10 kg Dimension of test chamber 450X450X450mm External dimension 950x1450x950 mm |
| (23) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Light discoloration (UV) tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Light discoloration (UV) Tester To measure the resistance to UV light of soling and upper material Standards :ASTM, JIS, BS, ISO, ICE, UL ASTM-D1148, HG/T3689 Five, the main technical parameters: The internal dimension of test chamber : 50 x 50 x 60 cm Temperature control range: normal temperature ~ 200. C. Control mode: automatic calculus controller Temperature display, 0.1. C. The control accuracy: ± 3. C. Distribution precision: plus or minus 1% 1. C (at-100. C). Time memory: 0-999 hours, blackouts, the memory type, including a buzzer. Wheel speed: Dia. 45 cm, 10 r. P.M. ± 2 r. P.M UV light source: UV300W light bulb Standard spare parts: shed board 2 pieces Heating mode: hot air loops Safety protection: EGO over temperature indicator, safety overloaded power switch ammeter Material: internal SUS# 304 stainless steel plate, external senior finish External dimensions (1 × W × H) 114 x 94 x 130 cm Power: AC-220 V 50 60 Hz 20 A |
| (24) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Zipper Tester SL-F33 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Zipper Tester, to determine the resistance to reciprocation of zipper (slide fastener), the test specimen is subjected to a specified number of cyclic operations whilst under lateral and longitudinal tension. Zipper Tester catches the head of zipper to do reciprocating movement in a constant speed for 30 times per minute, integral counter to stop the drive when a pre-selected count has been reached Specification Speed: 30/min 0-10 Kg lateral force. 0-5 Kg longitudinal force Counter: 1-999,999 times, adjustable |
| (25) Machinery | |
|---|---|
| Yarn Testing Machine | |
| Product Title : | ICI Mace Snag Tester SL-F34 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | ICI Mace Snag Tester. To determine the tendency of fabrics to snag(pull yarn loops from fabric) in normal wear(mace snag). Provided with 4 rotating test cylinders fitted with sleeves of test fabric, mace balls with tungsten carbide points and controlled by a predetermined electronic counter. • Snag Mace Diameter :31.8mm • Mace Weight:135g • Mace Prominent length:9.5mm • Rotation Speed:60+/-2rpm Original Accessories • Tungsten Carbide Points (Pack of 12) • Felt Sleeves (Pack of 4) • Snagging Photographs/Set Weight :60 kg |
| (26) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Torque Gauge SL-S02 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Torque Gauge To determine whether components of toys can be removed by a certain torque force. A torque-measuring device is used in conjunction with a torque clamp to record the applied force. Any projection, part or assembly of a toy that a child can grasp with at least the thumb & forefinger or the teeth shall be subject to the torque test. Related standards ASTM F963 CFR 16 CFR CPSC USA EN71 |
| (27) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | ASTM Impact Flooring Medium SL-S04 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | ASTM Impact Flooring Medium A standardised surface onto which a toy can be dropped from a certain height to simulate possible damage which may occur by falling from a crib, table or counter top or other impact situations. After testing, the toy is examined for possible hazards such as sharp edges, sharp points and small parts. Standard: ASTM F963 Specification：1/8″×12″×12″ 9 a Standards ：ASTM F963 8.7.1 |
| (28) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Push Pull Gauge SL-S03 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Push Pull Gauge To determine whether the components of toys can be removed by tensile force. A Force gauge is used in conjunction with a clamp to record the force applied. Any projection, part or assembly of a toy that a child can grasp with at least the thumb & forefinger or the teeth shall be subject to the tension test. Related standards ASTM F963 CFR 16 CFR CPSC USA EN71 |
| (29) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Bite Test Clamp SL-S06 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Bite Test Clamp Simulates a child biting the accessible area of toys. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period. The toy is then tested to ascertain whether or not any hazards result from the bite test such as sharp points/ sharp edges / small parts. Standard: ASTM F963, 16CFR 1500.52C |
| (30) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | EN 71 Impact Flooring Medium SL-S05 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | EN 71 Impact Flooring Medium A standardised surface onto which a toy can be dropped from a certain height to simulate possible damage which may occur by falling from a crib, table or counter top or other impact situations. After testing, the toy is examined for possible hazards such as sharp edges, sharp points and small parts. Specification：2mm Rubber+4mm SST Sheet 600mm×600mm Standard EN 71 |
| (31) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Flexure Test Fixture SL-S08 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Flexure Test Fixture To determine whether metallic wires or materials used for stiffening or retention of form in toys can be easily bent or broken. Potential hazards of sharp points & sharp edges. Standards: 16 CFR 1500.48 16 CFR 1500.49 EN-71 |
| (32) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Compression Head SL-S07 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Compression Head To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts. ASTM Compress Head Standard：ASTM F 963 8.10.1 EN Compression Head Standard EN71-1998 8.8 dimension ：28×28×19mm Diameter 30 mm round rod |
| (33) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Pacifier Test Fixture SL-S10 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Pacifier Test Fixture To determine whether the pacifiers for infants present choking or suffocating hazards. A pacifier is placed centrally in the opening of test fixture. The nipple is subjected to a tensile force of 2 lbs and held for 10 seconds. If the shield is pulled through the fixture, the pacifier has failed. Standard: 16 CFR 1510; ASTM F 963 4.21; EN71 |
| (34) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Rattle Test Fixture SL-S09 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Rattle Test Fixture To determine whether rattles for infants of up to 18 months old present choking or suffocating hazards. The rattle is placed in the opening of test fixture. If any part of the rattle can pass through the opening without being pushed or pulled, the rattle has failed. For other rattles incorporating nearly spherical, hemispherical or circular flared ends, a Supplemental Rattle Test Fixture is available. Standard: 16 CFR 1510; ASTM F 963 4.21; EN71-1998 8.17; GB6675-2003 A.5.3 |
| (35) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Accessibility Probes SL-S13 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Accessibility Probes To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe B for 37-96 months Standard: 16 CFR 1500.48; 16 CFR 1500.49; EN-71; GB 6675-2003 |
| (36) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Impact Tester SL-S11 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Impact Tester SL-S11 To simulate the mechanical damage through an impact action likely to be performed by a child. Assessment of sharp edges, sharp points and small parts may be carried out after impact. Standards: EN 71-1998 8.7 specifications： 1.dimension ：300(l)x300(w)x16(h)mm 2.adjust height：0-200mm 3.impact hammer diameter：80.00mm 4.impact hammer weight ：1Kg 5. with metric / imperial unit height dictate rule |
| (37) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Sharp Edge Tester SL-S12 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Sharp Edge Tester To determine whether accessible edges on toys are likely to cause injury. A self-adhesive PTFE tape is attached to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing. Dimensions: 290x180x115 mm Weight: 1.90 kg Standards: 16 CFR 1500.48, ASTM F963 4.8, EN-71 1998 8.2, ISO 8124 Accessories ：charging unit foot switch Standard import sharp edge tape base plate |
| (38) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Test Leakage Needle SL-S15 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Test Leakage Needle Diameter 1MM, the top radius 0.5MM, load 5N, for leakage testing, Standard: EN71-1; GB6675 A.5.19 Dimension Tolerance: + /-0.05mm |
| (39) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Small Parts Cylinder SL-S14 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Small Parts Cylinder To determine whether toys & other articles intended for use by children under 3 years old present choking, aspiration, or ingestion hazards because of small parts. If any objects can fit completely into the cylinder without compressing & in any orientation, it is defined as a "Small Part". Its internal dimensions simulate the fully expanded throat of a child under 3 years old. Standards: 16 CFR 1500.48, ASTM F963 4.8, EN-71 1998 8.2, ISO 8124 |
| (40) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Kinetic Energy Tester/Projectile Velocity Tester SL-S16 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Kinetic Energy Tester/Projectile Velocity Tester Kinetic Energy Tester To determine the size catapults kinetic energy of toys, the ejection of parts of the test apparatus through the tube or external testing of the components of the two sensors detect the ejection toy parts used away after a certain period of time, it has calculated the move Energy. The main instruments used for this test launch of baby toys or children's safety. Clock out：1 MHz Display：7 digit Display rang ：0.000001 to 9.999999 sec Projectile size ：Large then 2mm diameter Small then 35mm diameter ( for internal sensor ) Sensors distance：Fixed 150mm ( internal sensor ) Adjustable ：40mm - 400mm ( external sensor) Dimensions：240mm×310mm×130mm. Weight：16kg Standards：16 CFR 1500 ASTM F963 4.8 EN-71 ISO 8124 |
| (41) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Sharp Point Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Sharp Point Tester To determine whether accessible sharp points on toys are likely to cause injury. If the accessible sharp point penetrates a specified depth into the small rectangular opening of the tester, the LED is illuminated to indicate that the point is unacceptably sharp. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing. Related Standards ASTM F963 EN71 |
| (42) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Dry Testing Machine SL-F30 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Dry Testing Machine SL-F30 It is used for testing external colour and size alteration of various textiles, knitting fabrics and hot-meltbonded linings after they were washed by organic solvent and alkali solvent. Standards FZ/T01083-1999, FZ/T01013-1991, FZ80007.3-1999, ISO3175.1-1:1998, ISO3175.1-2:1998 and so on . Working Pattern Continuous revolution or crawl by timing and readout by digital. Capacity of Washtubs 11.4L Speed 47±3r/min Revolving Axle Tilt Angle 50±1° Working Time 0-30min External Dimensions 1050x580x800mm Weight 100kg Power Source Ac220V , 50Hz |
| (43) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Formaldehyde Tester for Textiles SL-F29 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Formaldehyde Tester for Textiles SL-F29 It is used to test formaldehyde content in various fabrics Features： 1. Microcomputer control, automatic data processing functions with the spectrum. 2.With the measurement of absorption curve, the selected wavelength, absorbance and transmittance parameters etc. 3.Chemical reagent package color (yellow), use less sample and reagent can reduce and prevent secondary pollution. 4.Real-time display ambient temperature,it can set the color of time, automatic measurement and display the measured values and the absorbance values of formaldehyde. 5.The size is small,as well as a light weight, with man-machine interaction,so as to operate simply Lower Limit of testing 5.00mg/kg Measuring Range 0.00-500.00mg/kg(it can reach 5000mg/kg with 10 times of sample dilution) Measuring Accuracy ≤5% Measuring Method It adopts the international standard of acetyl acetone method. Light Source Super highly bright light emitting diode. Wavelength：412nm Working Temperature 5-40℃ Host Machine Weight 2kg Power Source AC220V, 50Hz |
| (44) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Fastness to Ironing & Sublimation Tester SL-28 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Fastness to Ironing & Sublimation Tester SL-28 It is used to determine color fastness to hot pressing and dry heat and to perform sublimation of textiles or textile material. Standard : ISO BS AATCC DIN JIS One station Testing method : sublimation (heating two sides, Ironing (heating one side) Area of heating pellet 47x122mm Testing pressure 4kPa±1kPa Testing Temperature Room Temperature to 240℃, LCD External Dimensions 400x300x225mm Power Source AC220V |
| (45) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Vancometer |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Detailed parameter: Measurement of the gloss of all kinds of non-metallic coatings. ●Measurement of the surface gloss of the non-metallic decorative material Reading Range GU 0～199 Indication Error GU ±2 Measuring Area mm2 36×18 Incidence Angle Deg. 60 Volume (L×W×H) mm3 130×40×80 Main Weight g 430 |
| (46) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Sofa Durability Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Sofa Durability Tester Detailed parameter: It is used to testing the sofa back, seat, arm’s durability. Use a loading with specified form, frequency to repeatedly load on seat, back and arm surface loading. This test method is to simulate everyday use, the sofa on the long-term repeatability of the load bearing capacity. The machine adopts PLC touch screen and the program control. Can all loading frequencies, loading control the intensity of programming. The most reasonable regulation structure. Relevant parameters: a) Seat load the module: 50kg 200mm diameter impact face R341mm b) On the back of load modules: 200mmx100mm c) Arm load modules: diameter 50m d) Counter weight: 70kg, diameter 350mm e) Loading frequency: 0.33Hz ~ 0.42Hz (20 ~ 25 times / min f) Loading the spacing between the back: 300mm. g) Loading arm angle: 45 degrees. Auxiliary equipment, including weight and seat height measuring device |
| (47) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Mattress Durability Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Mattress Durability Tester Purpose: it is suitable to all kinds spring soft mattress. Palm fiber mattress and soft foam mattresses and other polymeric materials reference to the relevant standards. This machine is suitable for mattress, mattress test is not sufficient. Theory: put 2 loading block on a certain height above on the mattress, Alternating free fall with Certain frequency. Make repeatly loading to matress, to test the mattress’s long-term repeatability of the load bearing capacity. Spring mattress: The spring and soft lining materials for the inner core material, that cover with fabric fabric or Ruanxi and other bedding materials.Spring coverage: a spring mattress on the sum of the maximum cross-sectional area measured with the mattress area percentage. Compression: a mattress pad in the horizontal surface of the force applied vertically downward, causing the mattress by the force along the direction of surface displacement. |
| (48) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Slip Type Life Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Slip Type Life Tester It is used for testing fatique life of the slip type parts, such like caster,slip door,drawer. Testing terms:caster durability test,drawer slider testing,slip door durability testing. Maximum stroke 500mm Speed of 0.25m / s, adjustable PLC control text control Dimension (WxDxH) 134x60x124cm Power 1 ∮ AC 220V 50Hz 3A Air ≥ 6kgf/cm2 stable gas supply |
| (49) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Chair Legs Pressure-resistant Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Chair Legs Pressure-resistant Tester Detailed parameter: It is used for evaluating the pressure-resistant strength, in order to control the product quality in the process, to find out the defect and make product more perfect. Purpose: evaluating the pressure-resistant strength of the chair leg. Testing process: Slowly add to the 11 120 Newton, Keep 1 minute, unloading, followed by slow loading to 11120 Newton, for 1 minute, record the testing process. Pressure capacity: 30000 N Force sensor resolution <10000 Test speed: 0-50 mm / min Interface: Windows XP system, 256M memory, 17-inch color display Servo motor control, to maintain the feet of the plastic changes have been under the constant pressure type Breakpoint automatic shutdown Computerized automation, customers can write their own test program, the computer automatically generates power - time, force displacement curve. |
| (50) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Cornell Mattress Durability Tester SL-T06 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Cornell Mattress Durability Tester Testing for mattress on the long-term repeatability of the test load capacity, and the mattress compression deformation. With sofa Cornell fatigue life test method, motor driven eccentric wheel, adjust the height of the impact of the impact block, then 120-160 times / min speed impact testing of mattresses, the impact of counter measures the number of times after the set automatically shutdown. Circular pads made in accordance with ASTM F 1566-99 Computer, print force value, displacement, time table. Computer system output: Max 150kgf Display Accuracy: 0.001kgf Display accuracy: Indication of + / -0.1% Deformation precision: 0.001mm The impact of block speed: 120-160 times adjustable Impact height: 0-300mm adjustable Counter measures and set the range: 0-99999 times The impact of motor power: 2KW DC Computer system Motor: 1/4HP Panasonic servo motor Impact blocks and blocks meet ASTM F 1566-99 |
| (51) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Mattress Rollator |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Mattress Rollator Use a horizontal scroll in wooden barrels or hex (at both ends of the cylinder diameter 250 mm, 300 mm, the middle part of the test on the mattress, scroll back to assess human action mattress durability. Features: Wooden hex barrel weight = 109KG, cylinder weight = 140 KG. According to different mattress size, scroll, adjustable (adjustment of the limit switch) Low friction coefficient guides to ensure that the barrel weight fully to the mattress. Suitable mattress greatest dimension 2.3 X 2.5M. Text display provides a simple manipulation and creation. Applied standard: ASTM F1566, EN1957 |
| (52) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Formaldehyde Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Formaldehyde Tester I Application Formaldehyde mattress mattress tester is mainly applied to formaldehyde, VOC emission test II main parameter Studio dimensions: length × width × height = 1.0 × 1.0 × 0.3 (m) (referring to the internal space dimensions). Four corners, each with a box intake, a one-way air intake device, pore diameter D = 4mm. Pump flow range: 0.1 ~ 5L/min. Timing function: switch time, sniffing identified remind timing, sampling remind sampling time. Thermostat board size: 0.3 × 0.8m × 2 blocks. Constant temperature hot plate block uniformity: no two locations of the temperature difference between points is less than 1 ℃. Instruments construction：two parts，collection device and control cabniet；One collection device using non-adsorbed formaldehyde, VOC air within the stainless steel to produce a size for the long 1000mm, width 1000mm, 300mm high the box ，Body and the geometric center of the top four sides are fitted with a one-way valve diameter Φ10mm; the top of the sample connecting gas sampling port, the side of the installation of four-way valve, used to supplement the air. One-way valve in the sampling port next to the hole diameter Φ100mm Cover for odor discrimination (olfactory identified holes). All materials for the metal box, no formaldehyde and TVOC release. Laboratory Environmental Requirements Temperature of 23 ℃ ± 5 ℃, into the test chamber air formaldehyde concentration should be less than 0.01mg/m3, TVOC concentration should be less than 0.06mg/m3, at the time 24h (recommended laboratory cross-contamination between samples note). III Standards GB / T 18883-2002 standards for indoor air quality GB / T 18885-2009 ecological requirements of textile technology GB / T 18204.26-2000 public places determination of formaldehyde in the air OEKO-TEX ® Standard 200-2009 eco-textile standards |
| (53) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Hot Air Oven |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Hot Air Oven Specification Inside Body : Stainless Steel (SS 304) Out Side Body : MS Powder coated with stove enamel paint. (Fully SS Models also available) No. of Selves : 2 Adjustable Perforated Selves. Body Structure : Double Walled structure filled with glass wool insulation No. of Heaters : 2 x 1000 Watts Heater's Quality : High Quality Chrome Heater insulated with ceramic beads Air Circulation: By Air Circulating Fan to ensure even temperature distribution. Ventilation : Ventilation port with adjustable Opening Temp. Control : By Digital Temperature indicator and Controller Temp. Display : Digital Temperature display Range of Temp : Ambient to 250oC Accuracy : 0.1oC Least Count : 1oC Power : 220 Volt AC 50 Hz. Single Phase Related Standards ASTM D 5427 - 98 |
| (54) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Beaker Dyeing Machine |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Beaker Dyeing Machine HTHP Beaker Dyeing Machine is ideally suitable for sample dyeing of fabric and yarn at high temperature and pressure. Features of HTHP Beaker Dyeing Machine: The machine comprises of tank, beaker and gear box The beakers are capable of withstanding pressure upto 6.0 Kg/cm square. Microprocessor based programmer is provided which ensures temperature control. Promises long life and leak proof service even after many years of use. Specifications of HTHP Beaker Dyeing Machine: Electric Supply : Single phase 220 Volts, AC Supply Heater Supply : 3000 watt Single Phase Capacity of Beaker : 250 ml Beaker X 12 Pcs. Carriage Rotation : At 22 rpm. (±2 rpm) Maximum operating Temperature : 135°C. Maximum rate of heating : 3.5°C/Min. Control through Temperature Controller / Programmer based having auto/manual operation. Heater rating : 3 x 2 KW Medium used for Heating : Glycerine Electrical Supply : Single Phase A.C Motor : Reversible Synchronous Geared Motor Overall dimensions of the Unit : 700 ±05mm (L) x 470±05mm (H) x 370±05mm (W) Net Weight of the Unit : 35 Kg. Net Weight of the Beaker (250ml) : 10.980 Kg. |
| (55) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | PH Meter |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | PH Meter — pH Range: 0.00 to 14.00pH — Resolution & Accuracy: 0.01 & 0.05pH — Millivolt Range: 1999mV — Resolution & Accuracy: 1mV & 10mV — Calibration Points: 2 points — pH Buffer Options: PH4.00, pH6.86, pH9.18 — Temperature Compensation: 0 to 99º C, Manual — Dimensions: 210mm(L) 205mm(W) 65mm(H) — Power: 9VDC, using AC adapters 110VAC/220VAC, 60/50Hz |
| (56) Machinery | |
|---|---|
| Laboratory Dyeing Apparatus | |
| Product Title : | Shaking Water Bath SL-D01 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Shaking Water Bath Widely applicable for laboratory researches on bacteria cultivation, fermentation, hybridization, chemical and biochemical reaction, enzymes and tissues research, which have a high requirement on precision of shaking speed and temperature. Model Temperature Range Display Resolution Temperature Uniformity Shaking Speed Range Amplitude Power Consumption Interior Dimension (W×D×H, mm) Exterior Dimension (W×D×H, mm) SLD-1 RT+5~99degree 0.1degree ±0.1degree 30~150Times/min 30mm/ 40mm (Option) 1250W 438×310×250 643×350×353 SLD-2B SLD-3 1650W 618×310×250 823×350×355 DKZ-1C ±0.3degree 1500W 440× |
| (57) Machinery | |
|---|---|
| Colour Measuring Instruments Machine | |
| Product Title : | ISO Grey Scales |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | ISO Grey Scales For assessment of change in colour and staining in colourfastness testing 1-5 steps with half steps, in wallet. |
| (58) Machinery | |
|---|---|
| Colour Measuring Instruments Machine | |
| Product Title : | Blue Wool |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Blue Wool DC Blue Wool fabrics available are sold in 25 x 50 cm (10 x 20 inch) pieces. Conform to the specifications as described in BS EN ISO 105 B Series of test SDC Blue Wool No.1 Lightfastness Standard SDC Blue Wool No.2 Lightfastness Standard SDC Blue Wool No.3 Lightfastness Standard SDC Blue Wool No.4 Lightfastness Standard SDC Blue Wool No.5 Lightfastness Standard SDC Blue Wool No.6 Lightfastness Standard SDC Blue Wool No.7 Lightfastness Standard SDC Blue Wool No.8 Lightfastness Standard |
| (59) Machinery | |
|---|---|
| Colour Measuring Instruments Machine | |
| Product Title : | SDC Cotton Lawn Rubbing Fabric SL-C01 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | SDC Cotton Lawn Rubbing Fabric For use in testing the wet and dry rubbing fastness of textiles ISO 105 X12, M&S C8 and Shower resistance tests. Specification: 1 Piece 5cm x 5cm, 500 Piece Pack , |
| (60) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Elemendorf Tear Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Elemendorf Tear Tester The tearing strength of fabrics, papers, plastic films, or other similar materials is determined by measurement of the work done in tearing through a fixed length of the test specimen using Elemendorf Tear Tester. The Elemendorf Tear Tester consists of a brass sector pendulum pivoted on anti-friction ball bearings on a vertical bracket fixed on a rigid metallic base. The test specimen is in shape of a rectangle and is held between two clamps, one of which is mounted on the pendulum and the other is mounted on the vertical bracket. The clamps are mounted in such a manner that their holding faces are aligned with each other when the pendulum is locked in its raised position. The pendulum is released by lifting the release lever. This action causes the test specimen to tear right through. The tearing strength is indicated on a scale fitted on the pendulum against a low friction pointer pivoted on the same axis as the pendulum. An adjustable knife is mounted on the bracket on which the pendulum and the fixed clamp is mounted. The blade is located between the two clamps and is used for making the initial slit in the test specimen. A brass check weight is supplied with the tester for verification of its calibration. The apparatus is finished in blackmalt finish and bright chrome plating to give it a corrosion resistant finish. Augmenting weights for increasing the capacity of the tester are available as optional accessories. For testing of low strength materials, multiple specimens may be mounted at the same time. TECHNICAL DATA : Capacity 1600 g (can be increased to 3200 g or 6400 g by adding augmenting weights. Clamping Surfaces of each clamp 36 mm wide x 16mm high. Distance between clamps 2.8 mm Tearing Distance 43 mm Scale reading 0 to 100% of range. RELATED STANDARDS : IS 6489 – 1971 Method for Determination of Tear Strength of Woven Textile Fabrics by Elemendorf Tester. ASTM D 689-1979 Standard Test Method for Test for Internal Resistance of paper. ASTM D 1424 - 1983 Standard Test Method for Tear Resistance of Woven Fabrics by falling Pendulum (Elemendorf) Apparatus. ASTM D 1922 - 1967 Standard Test Method for Propagation of Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method. |
| (61) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Fabric pick counter |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Fabric pick counter Used for testing the number of yarn in warp-wise or across warp of all kinds of fabrics in set length. Standards：GB/T4668；ISO7211.2 Enlarge the number of times：10.20 Range of scale：0~50mm |
| (62) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | 45 degree Automatic Flammability Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | 45 degree Automatic Flammability Tester The specimen rack provides support for the holders in which the specimens are mounted. Its angle of inclination is 450. The rack can be moved sideways to enable fabrics of different thickness to be set at the specified distance from the tip of the jet with the help of an adjusting screw. A built-in finger is provided to gauge this distance for setting it to the desired value. The Specimen holder consists of two matched stainless steel U shaped plates between which the test specimen can be held. The specimen holder sits over the specimen rack in a precisely determined position 450 inclination and is so positioned that the igniting flame strikes the specimen centrally and 6 mm above the bottom edge perpendicular to the face of the test specimen. Five such specimens holders are provided with the equipment. The ignition arrangement comprises of a jet mounted on a extension of the shaft of a syncroset motor such that it can be rotated into a position perpendicular to the surface of the fabric. The distance between the tip of the jet and the surface of the burner can be adjusted to 8 mm. When the tip of the jet is moved away from the specimen, the jet becomes vertical. The flame is produced at the tip of the jet by LPG Gas. The length of the flame is set to 16 mm when the jet is vertical with the help of a control valve and is measured with the help of built in gauge rod. |
| (63) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Button Impact Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Button Impact Teste Button Impact Tester to determine the impact resistance of plastic sew-through flange buttons to a falling mass of 0.84kg (29.5 oz), released from a height of 67mm (2.625 inch) or other heights as required. Cracking, chipping or breakage constitutes failure. Weight: 4.1Kg Dimensions: 100 × 155 × 350mm (W × D × H) Standards: ASTM D 5171 |
| (64) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Digital Fabric Pick Counter |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Digital Fabric Pick Counter Digital Fabric Pick Counter is used to determine the thread density of woven fabrics and loop density of knitted fabrics. Equipped with a portable high-precision camera to capture and magnify pictures of fabrics, the number of threads or loops on captured pictures can be counted easily on the screen of the computer by the software STANDARDS GB/T 4668 ISO 7211.2 ASTM D3775 l Magnification of the camera 20×~400× l Specimen Woven fabrics, knitted fabrics l Measuring direction Vertical/Horizontal l Counting direction Warp-wise/Weft-wise l Display mode Thread/10mm and thread/inch l Mode of storing results In text files |
| (65) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Vertical Flammability Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Vertical Flammability Tester Flammability of fabrics may be determined by igniting one end of fabric under test by mean of a suitable burner having a specified flame intensity and determining the extend of propagation of flame and the time taken by the flame to propagate between two marked levels. In the vertical strip flammability tester, a test specimen cut from the fabric under test is suspended vertically inside an enclosure and the flame from a Bunsen burner is applied at its bottom edge. The time taken by the flame to propagate between two specified marks is then determined from which the numerical rating of flame resistance property found. This method is suitable for all fabrics which are in form of sheets or can be converted by cutting into sheets. Flammability Tester for fabrics consists of a vertical sheet metal cabinet closed on three sides and top and bottom. The front side is kept open for insertion of the test specimen. The test specimen is suspended from a clip such that it hangs freely in the center of the cabinet. Two marker wires are fixed behind the fabric under test such that they are located 28 cm and 155 cm below the clip. A removable auxiliary clip is also provided to enable shorter specimens of flame resistant fabrics to be tested. A bunsen burner of 9.5 mm diameter opening is placed in the lower half of the cabinet and can be moved on two guide rods to enable it to be brought vertically below the free end of the test specimen. A flexible pipe line with a needle valve is provided to control the flame height. TECHNICAL DATA Size of Test Specimen 183 cm x 4 cm Size of modified test specimen 40 cm x 4 cm Distance of upper marker wire from the main clip 28 cm Distance of lower marker wire from the main clip 155 cm Distance of lower marker wire from the auxiliary clip 10 cm Diameter of burner opening 9.5 mm Dimensions of the Cabinet 35 cm x 40 cm x 205 cm |
| (66) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Salt Spray Tester/ Salt Fog Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Salt Spray Tester/ Salt Fog Tester Corrosion Test Equipments/ Salt Fog Test Equipments The Salt Spray Chamber are specialized to test the performance of the products for its surface of various materials after treatment of corrosive protection by means of painting, coating, galvanizing, anodizing and of lubricant. Material: 1) Laboratory using PVC sheet, thickness 5 mm, the temperature reaches 80 degree Celsius; 2) Laboratory closure with high impact acrylic sheet, 6 mm thick; 3) Supplementary bottles of reagents attached to the water level perspective with hidden windows, clean easy, not easy to break; 4) Saturated air barrel using SUS #304 stainless steel barrel high pressure barrel insulation is best; 5) Laboratory basketball adopt flat indexing frame, adjustable angle, surrounded by mist side down exactly the same place the large number of test pieces Salt spray test NSS,ACSS laboratory 35℃±1℃ Saturated air drums 47℃±1℃ Corrosion test NSS.ACSS laboratory 50℃±1℃ Saturated air drums 63℃±1℃ Comply to international standards: CNS3627, 3885, 4159, 7669, 8886, JIS Do201, H8502, H8610, K5400, Z2371, ISO3768, 3769, 3770, 9227, ASTM B117, B268 Capacity: 110, 270, 480, 640L |
| (67) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Leather Softness Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Leather Softness Tester The feature of this leather softness tester is precision, beauty, easy operation, easy maintenance and easy carry. Leather softness tester is applied to measure the softness of leather and animal skins in order to understand the softness and hardness is uniform or not in the same batch of leather, or the softness and hardness is difference or not in a single piece of soft leather Corresponding standard: According to the standard IULTCS. IUP 136 Applicable industry Applied to test leather performance in shoes, clothing, luggage handbag industry, research laboratories; Commodity inspection, arbitration and technical supervision departments. Technical parameters: Model: Hz-3002 Load: 530 ± 10g (drove by a small pneumatic valve ) Scale: 0.1 ~ 10mm Volume: 12 × 49 × 16cm Weight: 4kg Configuration: Standard testing ring = 20 mm, or = 25 mm each one |
| (68) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Din Abrasive Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Din Abrasive Tester Din Abrasive Tester main function of DIN abrasive tester is to test the friction of surface by a particular piece of sandpaper, After friction for a certain time, and then assess the condition of material surface, weight, volume and thickness, from this standard to assess the abrasive nature of materials. Main functions: This tester is a high efficiency, good reproducibility and easy to operate, applied to test the abrasive nature of material, as such elastic material, rubber, tires, convey belt, transmit belt, sole, synthetic leather, leather and others. Corresponding standard: DIN-53516; ISO-4649; GB/T9867-88; Applicable industry: Applied to test leather performance in shoes, clothing, luggage handbag industry, research laboratories; Commodity inspection, arbitration and technical supervision departments. Technical parameters: Specimen Size: 16mm, thickness at least 6mm. Specimen Load: 10N 0.2N. Diameter of wear wheel: 150mm. Speed of wear wheel: 40 1RPM. Emery cloth Specification: 60 #, seam is less than 2mm. Testing Length: 40M (about 84 rotate). Horizontal displacement: 4.2mm / rotate. Machine Specifications Test-arm weight: 250 5 (g). Testing Load: 2.5N, 7.5N. Diameter abrasive wheel: 150 450L (mm). Emery cloth: 60 #, 425 473 1.5 (mm). Wheel Speed: 40 1RPM. Shift screw: 6 teeth / inch. Limit rotation: 85 rotate. Set rotation: 84 rotate (about 40M). Return form: Electric automatic reset. Drive Power: 40W; 1 / 30. Power: 220V 50Hz. Machine Dimensions: 600 330 420 (mm). Machine Weight: 75kg. |
| (69) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Taber Abrasion Tester |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Taber Abrasion Tester This tester applied to do the test of wear-resistant in skin, leather, cloth, paint, paper, flooring, plywood, glass and natural rubber. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased, Specimen to be removed after rotation to reach a certain number, observe the condition of the specimen or compare the weight with the previous material's, For the choice of grinding wheel models: H18, H22, CS17, S32, S33. Standards: DIN-53754, 53799, 53109, 52347, TAPPI-T476, ASTM-D1044, D3884, ISO-5470 Applicable industry: It is used in testing the performance of leather products, such as suitcases, carpets, cardboard, clothing, glass, plastic coating, ceramic tile, metal plating, paints, varnishes, decorative sheets, high-pressure sheets, plastics, textiles, flexible floor mats, traffic paint, anodizing layer, blankets, electronic components, decorative plates, wax, label, leather, dental materials, car ornaments, resin, furniture, and scientific research laboratories; Commodity inspection, arbitration, and technical supervision departments, The formula is: abrasive index formula: × 1000 Testing reference: Paint brick plywood plastic CS10 CS17 CS17 S32 S33 CS17 H18\H22 Machine Specifications: Specimen: 120 × 6.5 × 3mm Load: 250g, 500g, 1000g Counter: 6 digit electronic display, automatic shut down Testing Disk Speed: 0-70 Adjustable Machine Dimensions: 30 × 43 × 30cm Machine Weight: 30kg Attachment: A wrench, a group of grinding wheel, Fama (250g, 500g, 750g) each 2 PCS. Vacuum cleaner 1. Power: AC220V/50Hz |
| (70) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Spray Rating Tester （Wetting Meter） |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Spray Rating Tester To determine the surface wetting resistance of fabrics. Comprising a metal framework allowing distilled water to be sprayed through a nozzle onto a test specimen at 45° and 150mm below the nozzle. The appearance of the specimen is compared against an optional photographic scale. Parameters: a) Glass funnel: φ150 × 150mm (volume approximately 500 ml) b) Sample press release angle: 45 ° c) Sample clip diameter: φ150mm d) Nozzle head to the sample center distance: 150mm e) Dimensions: 500 × 400 × 500mm (L × W × H) f) Standards：GB/T4745-1997；ISO4902 The Spray Test is a simple method to determine the resistance of any fabric, which may or may nothave been given a water-resistant or water-repellent finish, to surface wetting by water. |
| (71) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Rotawash Washing Fastness Tester SL-F09 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Rotawash Washing Fastness Tester is used for determining colour fastness of textile materials to washings. This is attained by mechanically agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap – soda solution. Before being rinsing and dried. The change in colour of specimen and stains of the adjacent fabrics are assessed with standard Grey Scale. WASHING FASTNESS TESTER’ consists of a thermostatically controlled, electrically heated water bath made of Stainless Steel. The bath is heated by means of immersion heaters and its temperature controlled by a capillary type thermostat. The temperature of water inside the bath is displayed on a digital temperature indicator. The bath has a double walled hinged lid made of stainless steel sheets. The jars in which the test solution and the test specimens are kept during the test are made from stainless steel and are provided with rubber scales for water tight closing. They are held in a cast stainless steel rotor assembly mounted on a stainless steel shaft at the center of the bath and rotating about a horizontal axis with the help of a geared Motor. A clockwork timer is provided to stop the motor after a pre-determined time. The apparatus is fabricated on a sturdy angle iron frame and is completely enclosed on all four sides with mild steel sheet duly enameled in metallic green paint. The top of the apparatus is covered with stainless steel sheet. One hundred stainless steel balls of 6 mm diameter are supplied with the apparatus as standard accessory for providing beating action during the washing operation. Extra stainless steel balls and standard Grey Scales are available as optional accessory. TECHNICAL DATA : Number of Jars Eight Volume of each Jar 550 cc (Approx) Distance of base jars from the axis of rotation 50 mm Speed of rotation 40 to 45 rpm. Temperature of Water Bath Ambient of 980 C Motor ¼ HP 230 V AC. RELATED STANDARDS : IS 687 – 1979, 764 - 1979, 765 – 1979, 3417 – 179, 3417 – 179, Method of determination of Colour fastness of textile materials to washing : Test1, Test2, Test 3, Test 4 and Test 5 respectively. |
| (72) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Air Permeability Tester SL-F07 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Air Permeability Tester For textile consists of an arrangement for holding the test specimen between two flat faces so as to expose a known area to the flow of air through it, a vacuum system to draw air through the exposed of the test specimens, arrangement to measure the volume of air flowing through the test specimen, and arrangement to measure the pressure drop between the two faces of the test specimen, The test specimen is hold between two round shaped grips. The grips are lined with rubber gasket to avoid the leakage of air through the edge. The two grips can be held the test specimen with the help of a hand spirited can mechanism. The vacuum needed to draw the air through the test specimen is created with the vacuum pump supplied with the instrument. The vacuum pressure is measured by the manometer tube terms of mm of water level & airflow is measured by the rotameters supplied with the instrument. RELATED STANDARDS : IS 11056 – 1984 : Method for determination of Air Permeability of fabrics. DIN 55887 : Testing of fabrics Determination & the Air Permeability of fabrics. |
| (73) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Perspirometer SL-Fll |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Perspirometer SL-F11 Colour Fastness of dyed or printed fabrics against perspiration is determined by exposing the fabric sample to the action of both alkaline and acidic reagents while in contact with undyed adjacent fabrics is placed between plastic plates under a fixed load inside an oven maintained at 370 centigrade. The apparatus used for this test is called the Perspirometer. consists of a number of acrylic plates and which can be kept in suitable loading frame. The loading frame consists of two steel plates between which the acrylic plates placed. The test specimen are stitched between suitable white cloth pieces and dipped in either alkaline or acidic test solutions. The composite sample is placed in between any two acrylic plates. A number of test specimens can be loaded simultaneously between different sets of acrylic plates by stacking them one above the other. Loading is done by keeping a standard dead weight on top of the upper plate assembly, which consists of two parallel plates separated by suitable compensating springs. The guide rod attached to top plate of this assembly is locked while under load and the load removed. The springs compensate for subsequent variations in load due to variation in thickness of the test specimens on drying. The test is continued for the required time under the specified condition of temperature. After this the samples are removed from the frame and dried. The degree of staining of the while pieces of cloths and change in colour of the test specimens are evaluated using Grey Scales and compared against standard rating cards. All the components are made of stainless steel and are finished in black stoving enamel paint to give them a corrosion resistant finish. RELATED SPECIFICATIONS : IS 1971 - 1983 Method of Determination of Colour Fastness of Textile materials to Perspiration. AATCC 10 Method of Test for Colour Fastness to Perspiration. |
| (74) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Shaking Water Bath SL-D01 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Shaking Water Bath Widely applicable for laboratory researches on bacteria cultivation, fermentation, hybridization, chemical and biochemical reaction, enzymes and tissues research, which have a high requirement on precision of shaking speed and temperature. Model Temperature Range Display Resolution Temperature Uniformity Shaking Speed Range Amplitude Power Consumption Interior Dimension (W×D×H, mm) Exterior Dimension (W×D×H, mm) SLD-1 RT+5~99degree 0.1degree ±0.1degree 30~150Times/min 30mm/ 40mm (Option) 1250W 438×310×250 643×350×353 SLD-2B SLD-3 1650W 618×310×250 823×350×355 DKZ-1C ±0.3degree 1500W 440× |
| (75) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | PH Meter SL-D02 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | PH Meter — pH Range: 0.00 to 14.00pH — Resolution & Accuracy: 0.01 & 0.05pH — Millivolt Range: 1999mV — Resolution & Accuracy: 1mV & 10mV — Calibration Points: 2 points — pH Buffer Options: PH4.00, pH6.86, pH9.18 — Temperature Compensation: 0 to 99º C, Manual — Dimensions: 210mm(L) 205mm(W) 65mm(H) — Power: 9VDC, using AC adapters 110VAC/220VAC, 60/50Hz |
| (76) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Temperature and Humidity Chamber |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Temperature and Humidity Chamber 1 Performance: (for no-load, the air-cooled at room temperature 25 ℃) 1.1 Temperature range: -40 ℃ ~ 150 ℃ 1.2 Temperature Control Stability: ± 0.2 ℃ 1.3 Temperature distribution is: ± 1.0 ℃ (above 80 ℃ and below -40 ℃ the temperature distribution is ± 1.5 ℃) 1.4 Temperature rise time: room temperature rise to 150 ℃ need 35 minutes 1.5 Cooling time: Temp range Time needed 20~ 0℃ About 30 minutes 20~-20℃ About 40 minutes 20~-40℃ Around 50 minutes 1.6 Humidity: 10% ~ 98% RH. Note: 10% at 60 degrees when the temperature and humidity control can be 1.7 Stability: ± 2.5% RH. 1.8 humidity distributions are degrees: ± 3% 1.9 Temperature and humidity control: (ordinary normal range) Key Features LCD Colour Touch Screen Both Temperature and Humidity are Programmable With RS232 output to computer With Viewing Window With thermostats (prevent overheat) Inner material: Stainless steel SUS#304(1.20mm thick) stainless steel welding all aroud. Outside material: special steel powder coating, the bottom can be fixed, adjusted the level of the PU with four casters. |
| (77) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Round Cutter / Sample Cutter |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Round Cutter / Sample Cutter A specialized instrument to determine the GSM of the textiles (Woven, Non Woven or Knitted, Fabrics) Our Round Cutter can be used for virtually any type of material including Film, Foam, Carpet Paper and Board. The unit is recommended for Yield Testing i.e. determination of weight per unit area. The sample cutter cuts out rapidly and accurately circular specimens of 100 Sq. cm. which is exactly One Hundredth of a Square Meter, the result in grams, multiplied by 100, gives grams per square meter. GRAMS Per Square METER = Specimen Weight in Grams x 100 TECHNICAL DETAILS : SPECIMEN AREA 100 CM2 SPECIMEN DIAMETER 113 MM (Approx) TYPE OF CUT STANDARD BLADES HEAVY DUTY(GERMAN) FOR LONG LIFE RUBBER PAD FOR THIS APPLICATION FOR REPETETIVE TEST WITHOUT FAIL. PROCEDURE : The Cutter has been specially designed to make it portable due to its light weight. Only the fabric has to gripped between cutter base and Rubber pad cutter top to be rotated gently clockwise direction for accurate cutting of fabric. The cut fabric can be weighed and multiplied by 100 to get GSM. MAINTENANCE : To maintain the efficiency of the Cutter: a) The Blades should be turned or changed when they become damaged or blunt. b) The Cutting Pad should also be changed, when it becomes worn out. Note:- For best results, only approved blades and pads should be used. ACCESSORY : For determining the weight per area, a weighing scale having the minimum sensitivity of 0.01 gm is required. |
| (78) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Tensile Strength Tester SL-F36 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Tensile Strength Tester SL-F36 Tensile testing machines It is applied to textiles, dyeing and garment industry to test the breaking strength and others. Product Information It is applied to textiles, dyeing and garment industry to test the breaking strength (including strip method and grab method), extension rate at break ,tearing strength single-blade, double-blade, trapezia),billiard bursting strength and elastic material’s repeat elongation(including elasticity deformation ratio, recovery ratio and plasticity deformation),constant elongation, constant load, cloth commissure slip-off extent, suture slippage, knit goods armpit joint strength, sewing thread and single yarn strength. This machine can also be used for the tensile tests such as zipper, metal, paper, non-woven fabrics, linear materials and leather. Standards Breaking strength (sample method) GB/TT3923.1, ISO13934.1, ASTM D5035 (Grab method) GB/T3923.2 ISO13934.2 ASTM D5034 Tear strength (tongue-shaped tear) GB/T3917.2 ISO13937.2 ASTM D2261 Technical Parameter 1. Measuring range 1-100% full scale Model -50 -100 -300 Range 500N 1000N 3000N 2. Test Accuracy ≤±0.1%F.S 3. Drawing speed 0.1~1000mm/min(Arbitrary) 4. Regen Rate ~1000mm/min (Arbitrary) 5. Sampling frequency more than 2000 times/s 6. Elongation Resolution ≤0.01mm 7. Effective stroke 800mm 8. External Dimensions 500×460×1350mm 9. Power AC220V±10% 50Hz 10.Weight 125kg |
| (79) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Universal Wear Tester SL-S30 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Universal Wear Tester SL-S30 This tester is a multifunction and precision instrument for measuring the abrasion durability, flex wear and edge wear of the specimen as paper, plastics, rubber, textiles, leather…Etc. all tests may be run under wet or dry condition .the system will automatically stop when the specimen is worn out. Standard：AATCC-119,120,ASTM-D3886,D3514,D3885,DRAFT20-0-70 Technical Parameters： Tension Weight: 2~1/2 lb, 2~1 lb, 1~2 lb Head Weight: 2~1/2 lb, 2~1 lb Pressure Range: 1~9 p.s.i. Surface Abrasion speed:1 REV/approx.102cycles Counter:0~99,999 Table Reciprocal speed 120 /min Dimension(W*D*H):31×65×57cm Size: Weight:68 kg Power:1∮,AC 220V,4A |
| (80) Machinery | |
|---|---|
| Textile Testing And Measuring Machine | |
| Product Title : | Yo-yo Balls Tester SL-S32 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Yo-yo Balls Tester SL-S32 The yo-yo ball rope extension test instrument makes the length measuring system( to calculate the elongation length) and the yo-yo ball installed in the same spindle for rotating. When the yo-yo ball rotates at the speed 80r/min, the line of the ball will stretch along the centrifugal direction, and the test line(one end fixed in the ball, the other end fixed on the trolling reel) is connected with the encoder, the trolling reel and the spindle of the encoder are free state, and the bearing friction can be ignored. Interface display: rotating speed, length, start/stop/reset. (digital display, page display the speed and length); Length measuring system, DC motor with speed adjustment, intelligent MCU control. Wall fixing suport or floor stand seat（adjustable） Encoder and intelligent control signal transmission system Rotating speed:1-150（adjustable） Stroke：0-1000MM（adjustable） Standard: ASTM963-08 |
| (81) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Rain Test Chamber / Drip Test Chamber SL-E05 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Rain Test Chamber / Drip Test Chamber SL-E05 Application: mainly used in electronic electrician, aerospace, military scientific research institutions, such as external lighting, signal device and vehicle lamps shell protection test Standard GB 4208-2008 IPX4/IEC 529 Main parameter: 1. Spray water radius 300mm 2. Diameter for Water Pipe 16mm 3. Diameter for Aperture Water 0.4mm 4. Aperture spacing 50mm 5.Perdulum Swing Angle Control ±45 degree Celsius、±60 degree Celsius、±90 degree Celsius ±180 degree Celsius 6. Test speed 4r/min 7. Controller touch screen with showing test time 8. Angle control PLC control 9.hydraulic pressure flow meter，pressure regulating valve 10. Viewer visual big glass door 11.water supply storage tank、blower pump 12. safe guard Leakage protection, short circuit protection, motor overheating protection 13. Power AC220V (±10%) V/50HZ Dimension of Test cabinet 800×800×800mm Dimension 1000×1180×1600mm |
| (82) Machinery | |
|---|---|
| Fabric Testing Machine | |
| Product Title : | ISO15025 Protective clothing Flammability Tester SL-F40 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | ISO15025 Protective clothing Flammability Tester SL-F40 This protective clothing flammability tester is designed according to ISO15025 standard. It is mainly used for simulation technology assessment protective clothing on fire danger of the spread of flame performance. It also can measure limited flame spread properties of vertically oriented textile fabrics and indurstial products in the form of single or multi-component fabrics when subjected to a small defined flame. Flame Angle 0°、30°、90° Height of Flame 25±2mm 40±2mm Flame time +/-1 s (can be adustable) precision for afterflame time & glowflame time±0.1s Burn tube according to standard ISO15025, with copper materail Gas supply : Methane Gas dimension L1200mmXW 900mmxH1300mm |
| (83) Machinery | |
|---|---|
| Inspection Machine | |
| Product Title : | Dual Arm Drop Test Machine SL-E06 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Dual Arm Drop Test Machine SL-E06 Drop Height（mm）:400-1500 Max weight for test sample（kg）：60 max dimension for test sample（mm）：1400×1000×800 dimension for impact panel（mm）：1400×1200 dimension for hold arm mm）：700 X 350 horse power ：raise a third P, manual adjustable wide dimension for test machine （mm）：1400×1200×2200 net weight（kg）:500 comply to ISO22488-1972（E）standard |
| (84) Machinery | |
|---|---|
| Testing Machine | |
| Product Title : | Kinetic Energy Tester SL-S20 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Kinetic Energy Tester The Kinetic Energy Tester is used to test related materials from the launch of the toys and toys from the launch of a non-exclusive material that may be caused by the ejection of some, but not all of the potential risk of accidents. Complies to standards：ASTM: F963-03 EN-71-03 Main Technical Parameter Power Supply: AC 220V/ Single phase, 50 HZ Max time: 15.000000S Display range: 0.000001--15.000000S Speed display range: 0.007M/S—10000.000M/S. Input channels: Internal /external channels (external channel is optional) The distance between front sensor and rear sensor: 150mm, tolerance 0.1mm Keys: internal / external channels, reset keys. |
| (85) Machinery | |
|---|---|
| Fabric Testing Machine | |
| Product Title : | Horizontal Flammability Tester SL-S33 |
| Pattern | |
| Feature | |
| End Use | |
| Product Description | Horizontal Flammability Tester to determine the flammability of textiles and automotive interior. Horizontal flammability tester complies with ISO 3795, ASTM D5132, FMVSS 302, etc. Application Horizontal Flammability Tester, to determine the comparative burn rates and burn resistance of textiles, particularly those for automotive interior use. Horizontal flammability tester is safe and easy to operate, Comprises draft free stainless steel cabinet with observation window, sample holder and door mounted burner. Automatic gas and timing control system including solenoid control gas valve and automatic ignition timer and controls. Specifications Fire nozzle diameter: 9.5mm Fire height: 38mm+/-2 Sample clamp: 360x100mm Interior Dimension: 330x50mm The sample below: 25mm Pitch between metal wire is 25mm Marked line: Starting point 38mm/End point 292mm from Igniting point Distance from Nozzle to Sample: 19mm Standards ISO 3795,FMVSS 302,DIN 75200,SAE J369, ASTM D5132,JIS D1201,BSAU 1690 Power 220 /110 V 50/60 Hz 2 A Weight 18 Kg Dimension for the flammability chamber 381mm×203mm×356mm Dimensions 460×200×400 mm(LxWxH) |
Welcome Fancel Xiao
Your Contact Details
| Contact Person | Fancel Xiao |
| Designation | skylineinstruments |
| Address | B-A1011 MingHuo Electronics square ChangAn Town,Dongguan City Guangdong Province,China |
| City | Dongguan |
| Country | China |
| Zip Code | 523000 |
| [email protected] | |
| Contact No | 86-769-22311237 |
| Website | www.skylineinstruments.com |
Skyline Instruments Co.,LTD
Enquire Now
Kindly fill correct information below for the Preferred Supplier to contact you. You may get a verification call from YnFx to authenticate your enquiry. *Asterisks mark mandatory fields.
manage account
Search